Skip to main content

v1.0

Minor Versionm

by Petr Roupec

  1. Select Networks Select Network Configuration Manager
    • Select Networks

    • Select Network Configuration Manager

  2. Select Hardware After Add new LAN adapter
    • Select Hardware

    • After Add new LAN adapter

  3. Select the adapter Inter(R) PRO/100...... And select Continue
    • Select the adapter Inter(R) PRO/100......

    • And select Continue

  4. Select -SCO TCP/IP And ADD
    • Select -SCO TCP/IP

    • And ADD

  5. Check data, and select OK Confirm the configuration - OK
    • Check data, and select OK

    • Confirm the configuration - OK

  6. Add new LAN adapter Intel(R) PRO/1000 Netw..... And select Continue
    • Add new LAN adapter Intel(R) PRO/1000 Netw.....

    • And select Continue

  7. Select SCO TCP/IP And Add
    • Select SCO TCP/IP

    • And Add

  8. Check data, and select OK And select  EXIT
    • Check data, and select OK

    • And select EXIT

  9. In this question select YES
    • In this question select YES

  10. if you want. Select Y and ENTER if you want. Select Y and ENTER
    • if you want. Select Y and ENTER

    • if you want. Select Y and ENTER

  11. Press ENTER to continue And EXIT
    • Press ENTER to continue

    • And EXIT

  12. Insert init 6 to reset
    • Insert init 6 to reset

Finish Line

Alejandro Pagán Albertos

Member since: 11/08/2016

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 106