Skip to main content

Made public V1.0.1

Major VersionM

by Petr Roupec

  1. In this case MAC Mini connected to terminal bus is being used for data store. Here is a configuration example of share point.
    • In this case MAC Mini connected to terminal bus is being used for data store. Here is a configuration example of share point.

  2. Insert Acronis CD into drive and boot the computer and when selection screen appear select “Acronis True Image 2014”. You can use keyboard as a mouse by pressing F10 - see com- mend on right hand side of the screen. If not booted in 60 second coputer boots from hardisk.
    • Insert Acronis CD into drive and boot the computer and when selection screen appear select “Acronis True Image 2014”.

    • You can use keyboard as a mouse by pressing F10 - see com- mend on right hand side of the screen. If not booted in 60 second coputer boots from hardisk.

    • Acronis system preparation

    • Af ter selection screen is shown - it will take several minutes

    • NO PANIC!

  3. Enter to configuration menu as shown on picture Configure IP address of the network card connected to Terminal Bus.
    • Enter to configuration menu as shown on picture

    • Configure IP address of the network card connected to Terminal Bus.

    • The IP address must be in the same range as computer to which backup is made.

  4. Verify configuration of the IP address switch to command line by pressing CTRL+F2
    • Verify configuration of the IP address

    • switch to command line by pressing CTRL+F2

    • Type command ifconfig and check the IP address.

    • Use ping command to verify if computer to which backup is made is reachable.

    • Return to graphical interface by pressing CTRL+F1.

  5. “Recuperacion” and instruct Acronis to search for backup. Select computer on which backup will be located it takes some time to get network response
    • “Recuperacion” and instruct Acronis to search for backup.

    • Select computer on which backup will be located

    • it takes some time to get network response

    • When computer selected dialog for user name and password is shown.

    • Password verification

    • After pressing acceptar dialog indication successful connection to target computer is show. Now you have to press “Cancelar” to move ahead.

    • Warning message is shown - you can safely ignore it

  6. After previous step list of folders is being shown. Select folder and backup archive. Select which hardisk from archive you would like to recover Select hardisk on target computer to restore
    • After previous step list of folders is being shown. Select folder and backup archive.

    • Select which hardisk from archive you would like to recover

    • Select hardisk on target computer to restore

  7. All recovery tasks are listed here. Progress is being shown wait until completion
    • All recovery tasks are listed here.

    • Progress is being shown

    • wait until completion

    • By closing Acronis as shown computer is being directly rebooted.

    • Please remove CD prior to closing Acronis.

Conclusion

You are DONE!

Computer is back in service.

Josef Roupec

Member since: 08/14/2015

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 196