Site Navigation

Your Account

Choose Language

1.3

Minor Versionm

by Petr Roupec

Tools

Parts

No parts required.

  1. Insert bootable CD and interrupt a booting sequence by pressing "ESC" key
    • Insert bootable CD and interrupt a booting sequence by pressing "ESC" key

    • On prompt type:

      • boot IDE

    • You will asked „Interact with IPL (Y,N)“. Answer with N.

    Add Comment

  2. Configure network card located on the motherboard named eth0 by following command
    • Configure network card located on the motherboard named eth0 by following command

      • ifconfig eth0 142.124.13.200

      • IP address MUST NOT COLLIDE with IP addresses of existing computers

      • Test if ftp server can be reached over network by ping command

        • ping 142.124.13.222

    Add Comment

    • Verify by fdisk command if all hard-drives are visible. Some ES680 station might have two disks.

    • fdisk -l

      • There is a disk /dev/sda with capacity 18.2 GB

      • There is a disk /dev/sdb with capacity 72.8 GB

      • the parameter above is lower case L

    Add Comment

    • Copy content of the image from the server to the disk.

    Add Comment

Finish Line

Petr Roupec

Member since: 08/13/2015

10 Guides authored

Team

Admin Member of Admin

Community

1 Member

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 50